2017 Fisher Plows HT Series 7' 6"

Unique Features

• PLOW BLADE CONSTRUCTION: Ideally suited for half-ton vehicles, the 7' 6" powder coated, steel moldboard is 27" tall, offering you a full size plow for personal use. The aggressive, 75-degree attack angle provides enhanced scraping and back dragging.
• STRUCTURAL REINFORCEMENT: The HT Series™ snow plow is backed by six vertical ribs and a full-length horizontal steel tube that provide extra stability and strength to the core of the plow blade.
• RELIABLE HYDRAULICS: We produce our own hydraulic system to ensure the highest standards of performance, quality and reliability, giving you a plow that is fast, responsive and built to last. All critical hydraulic components are fully enclosed for protection from the elements. The Scrape Lock feature hydraulically locks the blade down for cleaner scraping and back dragging performance.
• TRIP PROTECTION: Our industry-leading trip-edge design protects you and your equipment when encountering hidden obstacles. For improved efficiency and less cleanup, only the bottom edge trips, keeping the blade upright and plowed snow in front of the blade. The FISHER® trip edge uses compression-type springs that never require adjustment and will not wear out like extension springs.

Universal Features

• MINUTE MOUNT® 2 SNOWPLOW MOUNTING SYSTEM: The reliable, mechanical attachment design of the Minute Mount® 2 snowplow mounting system allows for easy hook-up with no tools required and no electrical switches to fail and leave you struggling out in the cold. The vehicle mounts and lower gear are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. Simply raise the pin release handle and push on the headgear to pop the pins into place. Then, raise the jack, snap it into place and plug in the electrical connectors.
• FLEET FLEX ELECTRICAL SYSTEM: The FLEET FLEX system provides easy operation, increased reliability, simple wiring and easy installation. Addtional features include programmable "soft-stop," "one-touch" float, and built-in SECURITY GUARD™ Anti-Theft System.
• SECURITY GUARD™ ANTI-THEFT SYSTEM: The exclusive SECURITY GUARD™ Anti-Theft System is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck. Unlike physical locks that can easily be cut or removed, the system provides a deterrent against theft by allowing you to electronically lock the snow plow's hydraulic functions, rendering your plow inoperable to unauthorized users.
• INTENSIFIRE™ HALOGEN HEADLAMPS: State-of-the-art reflector optics provide a smooth, wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall. INTENSIFIRE™ halogen headlamps feature combination park and turn signal lights that conform to Federal Motor Vehicle Safety Standards. Your vehicle light switch activates the plow lights so a separate in-cab switch is not needed. The headlamps are held firmly in place with a two-stud mounting bracket, to maintain proper alignment even under harsh shock and vibration forces. Reflector optics provide a smooth, wide beam pattern with minimal glare, giving the operator a clear view of the entire plowing area in front. An adhesive bond helps seal out water between the lens, reflector and housing to prevent damage. The INTENSIFIRE'S H13 long-life halogen bulbs have an average life of 1,500 hours, and are easy to replace through a simple three-screw bulb access cover.
• STORM GUARD™ BAKED-ON POWDER COAT: The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows. Each FISHER plow goes through an automated eight-wheel shot blaster pre-treatment process to remove mill scale and profile steel surfaces for the best adhesion, followed by a multi-stage pre-wash which provides superior surface preparation. Then a durable epoxy primer is applied to improve corrosion resistance and enhance powder coat adhesion. The power coat is then applied with robotic guns in a climate-controlled powder-coat booth that ensure precise, uniform powder coat coverage. The final baking process seals the long-lasting high gloss FISHER yellow coat, to provide superior protection for your snow plow, season after season.
• UNIVERSAL CONTROL OPTIONS: Choose between the ergonomic Fish-Stik® Handheld control or the dash-mounted joystick control based on your preference. Both Feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate “power” and “float” mode.
• STORM GUARD™ BAKED-ON POWDER COAT: The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows. Each FISHER plow goes through an automated eight-wheel shot blaster pre-treatment process to remove mill scale and profile steel surfaces for the best adhesion, followed by a multi-stage pre-wash which provides superior surface preparation. Then a durable epoxy primer is applied to improve corrosion resistance and enhance powder coat adhesion. The power coat is then applied with robotic guns in a climate-controlled powder-coat booth that ensure precise, uniform powder coat coverage. The final baking process seals the long-lasting high gloss FISHER yellow coat, to provide superior protection for your snow plow, season after season.
• ISOLATION MODULE: An underhood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections that comply with OEM requirements. Isolating the plow's electrical system from the vehicle's prevents the potential of electrical system damage in the event of a shorted circuit.